I need to figure this out and I need your help. I have a G40 10mm and loaded 180gr S&S polymer coated lead bullets over 5.2gr of HP38 COL 1.260 with a taper crimp of .002 CCI 300 primers. Velocity was 944fps pretty low. I used the published data from Lee for 180 gr jacketed bullet. I shot about 150 rounds perfectly and all were consistent feel, except the last one. This case was stuck in the barrel after the primer blew out and blew off the extractor and bent the plunger, since I can't...
What Happened, And why am I still here?
What Happened, And why am I still here?